Xhorse VVDI PROG ECU Programmer

10. Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon, etc. chip continuously update service.

Notice:
1. Do not click firmware upgrade in VVDI Prog software, or it will give a communication server error. The firmware is fixed at version 2.0, no need to update.
2. Please do wiring 100% same as the connection diagram in VVDI Prog software, DO NOT lengthen the connection lines with other parts. Or will fail to read.
3. Voltage required: 12V/3-5A

VVDI Prog Features:
1. Built-in update software: Make VVDI Prog update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed


VVDI Prog Latest Update Information:

Xhorse VVDI Prog V5.3.4 (2024-06-4)
Internal chip upgrade, version 5.3.4 supports the new VVDI PROG Programmer with serial number VP05 *****
Software versions prior to 5.3.4 do not support VP05**** serial number products

Xhorse VVDI Prog V5.3.3 (2024-01-24):
This version doesn't need to update the firmware
Some ECU options process optimization
Land Rover RFA Adapter options process optimization
RH850 series: Some options wiring diagram updated
Modify LOCK_BCM2 options in
<4-IMMOBILIZER>->:
Erasing failure repair and prompt message modification 
Modify CAVALIER(2018) 
option in
<7-AIRBAG>->:
Wiring diagram update 
Modify LITHIUM BATTERY MODULE 
option in
<8-OTHER>->:
Wiring diagram update  

VVDI Prog V5.3.2 (2023-12-11)
This version doesn't need to update firmware
Optimization of ISN calculation for some ECU modules.   
VW MQB dashboard process optimization. 
BMW CAS4, Porsche BCM, Land Rover RFA options adapter detected illegal repair  
Modify ENGINE-341
option in <3-ECU>->:
Optimize the process and Wiring diagram update.   
Modify PIC12F1822 option in <2-MCU>->: Wiring diagram update.
Modify XINGMA 315
option in <8-OTHER>->:
Optimize the process and
Wiring diagram update. 
Modify QILIN VH
option in <8-OTHER>->:
Optimize the process and
Wiring diagram update.  
Modify YingJie 500 315,
ZhuHong 500 315 
option in <8-OTHER>->:
Optimize the process.

VVDI Prog V5.3.1 (2023-09-27)
This version doesn't need to update the firmware
+ Add M68HC805P18(H44H),
  M68HC805P18(K05Y),
  MC68HC05P18(1F52W),
  MC68HC805P18(0G64R),
  MC68HC805P18(G64R),
  XC68HC805P18(G04R)
  options in 
  <2-MCU>->
+ Add  RENEGADE BCM(2017)(R7F701034),
  RENEGADE BCM(R7F701056)
  options in <4-IMMOBILIZER>->   
+ Add 
  Beetile(D70F3524)-READ(WELD),
  Beetile(D70F3524)-WRITE(WELD)
  options in
  <5-DASHBOARD>->
+ Add VIAGGIO SMARTBOX
  option in <8-OTHER>->
+ Add HA_MA S7
  option in <8-OTHER>->

VVDI Prog V5.3.0 (2023-08-30)
* This version doesn't need to update the firmware
* Modify GL8 BCM(2017--)-WRITE,
option in <4-IMMOBILIZER>->:
Optimize the process
Add  FENGSHEN S30(93C46A)
option in 
<8-OTHER>->

VVDI Prog V5.2.9 (2023-07-04)
* This version doesn't need to update the firmware
* Modify GL8 BCM(2017--)-READ,
  GL8 BCM(2017--)-WRITE,
  options in
  <5-DASHBOARD>->:
  Optimize the process 
* Modify HOWO A7,
  HOWO SITRAK 2083,
  HOWO T5,
  HOWO T5H,
  HOWO T7H,
  HOWO TX,
  Sino Trunk2083,
  SITRAK 6011,
  SITRAK 6021,
  SITRAK C5H SQUARE REMOTE,
  SITRAK C7H,
  SITRAK C7H B5,
  SITRAK RHOMBUS REMOTE,
  SITRAK T7H
  options in
  <8-OTHER>->:
  Optimize the process   
+ Add XINGMA 315
  option in 
  <8-OTHER>->  
+ Add QILIN VH
  option in 
  <8-OTHER>->  
+ Add SITRAK C7H 540
  option in
  <8-OTHER>->

VVDI Prog V5.2.8 (2023-05-31)
This version doesn't need to update the firmware
Modify MQB-LOCK(D70F35xx)-WRITE, VW-4th-NEC35XX-WRITE, options in <5-DASHBOARD>->:
  Optimize the process  
+ Add GL8 BCM(2017--)-READ,
  GL8 BCM(2017--)-WRITE 
  options in 
  <4-IMMOBILIZER>-> 
+ Add  Rover 2017 BCM(MPC5746G),
  Rover 2017 BCM(MPC5748G)
  options in 
  <4-IMMOBILIZER>->
+ Add  SPECIAL CV(R5F2138A)(2018)
  option in 
  <5-DASHBOARD>->
+ Add  EXCELLE SRS(XC2336A-72)(2015)
  option in <7-AIRBAG>->  
+ Add  BENZ W207 REAR MODULE
  option in 
  <8-OTHER>->
+ Add  ROVER-SHIFT-GEAR-MODULE,
  RANGE-ROVER-SEAT-MODULE2
  options in 
  <8-OTHER>->
+ Add  ROEWE-I6-ESL(SPC5602D)(2018)
  option in 
  <8-OTHER>->
+ Add BLADE KEY(2018-2021),
  SMART KEY MOUDLE(2018-2021)
  options in 
  <8-OTHER>->
+ Add Creta/Alcazar SMART KEY MOUDLE,
  I10/I20 SMART KEY MOUDLE
  options in 
  <8-OTHER>->

VVDI Prog Connection for Sprinter:

  This function requires internet support
Click the "Upgrade" button, enter the upgrade interface, as shown in the following picture

Enter update interface, if software show "communication with server failed", please close your Anti-virus and computer firewall and retry. If software show "unable to find equipment", please reconnect the device.
Tip information show the latest software version and upgrade information
Device information show the device SN, device firmware version and the latest firmware version

Firmware Upgrade Steps:
1. Select the firmware version
2. Click the “Start Firmware Upgrade” button
3. Don't close or pull out USB cable before upgrade finished

Software Upgrade Steps:
1. Click the “Software Link 1" or "Software Link 2" button, and download the software from the web
2. Extract the file

VVDI Prog Programmer Unit Description:

1.16 Pin DIP socket Function:
Read EEPROM chips use method: Follow the image direction when inserting the DIP chip (PIN1 as the yellow point show as the picture);
SOP chip needs soldering on 16Pin adaptor first, then insert the chip following the image direction

Function: Read & Write MC68HC(9)12, V850, H8X, R5C series chips, current version is V2
Use method: Soldering the line on the pin of the chip before reading and writing
Notes:
(1) Please check all connection lines, ensure a correct and reliable connection
(2) Please don’t lengthen the CLK and GND-C line, maybe cause read data to fail.


3. ECU Reflash Cable
Function: Read & Write engine ECU
Use method: Connect the ECU and R&W
Notes: Please check all connection lines, ensure a correct and reliable connection


4. MC9S12 Reflash Cable
 Function: Read & Write MC9S08, MC9S12 series chips, current version is V1
Use Method: Soldering the line on the pin of the chip before reading and writing
Notes:
(1) Please check all connection lines, ensure a correct and reliable connection.
(2) Please don’t lengthen the CLK and GND-C line, maybe cause read data to fail.

VVDI Prog Programmer Feedback:

Did a few tests today and this is what I found out.
It seems that VVDI prog reading speed is dependent on the processor speed of the computer.
CAS3 0L15Y flash read times
Centrino processor @ 1.6ghz Windows XP = 12mins
Core2 Duo processor @ 2.5ghz Windows 7 32 bit = 5 mins
i7 @ 4.4ghz Windows 7 64 bit = 2mins 30 seconds.
Other programmers do not seem to be affected by processor speed at all.
I also would have thought this was a fairly easy question to answer without me doing all the testing
Tested by me: cas 2, cas 3, cas 3+, Cas4 5m48h, volvo cem v40 all ok.
Is a very good tool and for BMW CAS4.
I tested today D80 and a m35080v6, and they work perfectly.
Mine erased D160 (BMW F01 dash) with no problem.
Tried to renew bmw e series 868 key. Vvdi programmer claimed operation success but in Tango key is now recognized as transponder type A. locked
I did renew 2 keys! Both worked and are now programmed to cars!
Only thing you need to disconnect from PCB is battery while writing the renew file. (Remove the batteries)
Renew BMW series E 868 key – 100% OK z vvdi-prog v4.5.7
FRM3 works perfectly
More EDC17 under ECU section would be great!
Especially BMW EDC16 and EDC17 for ISN purposes.
BMW F series FEM module reading but for that i can only dream about…
BMW BMSX bike ECU would be great…
Renew pcf7946 and 29f family
Renew E series remote with pcf7942 / pcf7944 would be fine
Unlock and download the 9S12G128 secure without erasing it first would be nice.
I read the CAS3+ MCU with VVDI Prog and that worked perfect.
BMW FRM3 series Exx – READ and WRITE – OK
BMW KEY series Exx – OK
BMW Dashboard 6WB 160DQWT – READ, ERASE, WRITE – OK

VVDI Prog Programmer Package List:

1. VVDI Prog device
2. EEPROM Socket
3. EEPROM Adapter
4. MC9S12 Reflash Cable V1
5. MCU Reflash Cable V3
6. ECU Reflash Cable
7. USB B-Tyte Cable