weight:
15kg
package:
44cm*42cm*38cm
1: Support EV Diagnostics
2: Support Autoauth for F.C.A SGW
3: ADVANCED ECU ONLINE PROGRAMMING & J2534 PROGRAMMING
4: High-end Online Functions
5: Topology Map & A Deep Inspection System Diagnosis
6: Full Special Functions & Full Bi-Directional Control
7: Support almost automotive communication protocols CAN/CANFD/DoIP
8: Supports 85 HD Brands
9: Easy Coding for 99% Car Brands
Launch X431 PAD V ELITE comes with New Smartlink CVCI for gasoline cars and diesel heavy-duty trucks, supports CAN FD, Online Programming + J2534 Reprogramming, Can Perform 60+ service functions, Bidirectional Control, ADAS calibration function, TPMS service, and 8 extended module functions.
Operating System: Android 10.0 operating system and 8-core Processor, 2.OGHz CPU can work faster, Battery: 9360 mAh lithium polymer battery, Screen: 10.1" touch screen, Storage: 4 GB*128 GB(can be extended up to 256 GB)
Model: SP510
From Software:
From Hardware:
LAUNCH X431 PAD V Elite Main Functions
EV Diagnostics (Optional Add-On): Supports electric vehicle HV system and battery pack diagnostics, repair, and maintenance of battery packs.
AutoAuth for F.C.A SGW: Supports ADAS calibration, full bidirectional control, key addition, topology mapping/graph, PIN detection, PEV (pure electric vehicle) functions, Renault SGW diagnostics, intelligent diagnostics, and local diagnostics.
Advanced ECU Online & J2534 Programming:
High-End Online Functions:
Topology Map & Deep System Inspection:
Full Special Functions & Bi-Directional Control:
Extensive Vehicle & Protocol Coverage:
Heavy-Duty Vehicle Support:
Notice:
Global Version for Customers outside the UK and EU countries
UK/EU Version for UK/EU Countries customers
Supports Extended Function Modules
X431 HDIII: Enlarge diagnostic services to 24V heavy-duty trucks.
X431 BST360: Monitor vehicle battery health status.
Video Scope: Check the hard-to-reach parts (pump, engine, pipes, etc).
X431-PROG3: For advanced key programming & module cloning.
ADAS mobile/PRO: Calibrate driver assistance systems.
WiFi Printer: To print out diagnostic reports, live data, and other information without taking too much time.
Scopebox: To quickly acquire circuit signals.
Sensorbox: To simulate vehicle sensor faults.
Multimeter: Allows you to measure the physical parameters such as voltage, resistance, frequency, etc.
Heavy Duty Truck Software License: for gasoline cars and diesel heavy-duty trucks with Smarlink C
NOTE: The expansion functional module must be used with the relevant equipment. (Need extra costs to buy these function modules)
Advantages of programming software in PAD V compared with other products?
Advantages of Volkswagen Audi in pad v software:
1. Large amount of online coding data.
2. The online parameter configuration data is large.
3. Online matching and calibration data are large.
Advantages of BMW in pad v software:
1. Set code data to March, 2022.
2. The Brush Hide feature has help mode and expert mode.
3. Support modification.
Advantages of Mercedes-Benz in pad v software:
1. Basically complete before the 13 models, big data collection after the 13 models.
2. It has the initial authorization before the 13th model and the machine module and transmission module can be cloned after the 13th model.
3. The engine and gearbox modules wipe empty and clone after the 14th model.
Advantages of other brands in pad v software: The function is online after the 18th model:
1. For Ford
2. For Chrysler
3. For FIAT (support for Chrysler and FIAT original factory account login (overseas)
4. All models and functions of FORD's original factory have been online since 2018. 1.1 Basic functions: after 18 models, X-431 is offline (fault codes may not be complete) 1.2 special features: after 18 models, X-431 is online(With obvious advantages, other products are currently only developing ADAS and some anti-theft related features,but special functions and other special functions are not yet developed)
5. The original factory of Chrysler and FIAT has gradually completed all models and functions since 2018. Online. X-431 All functions online, fault code may not be complete. Compared with obvious advantages, less competitive product development models.
LAUNCH X431 PAD V Elite Functions Display
Full OE-LEVEL Bi-Directional Control Scan Tool(Active Test)
The X431 PAD V enables you to transmit control commands to operate vehicle systems without using the vehicle’s controls, allowing precise verification of system input and output. Supported functions include: radiator fan activation, interior and exterior lights, horn, throttle modulation, window and mirror operation, door lock actuators, injector testing, ACC Lane Keeping Assist System (LKAS) on/off, front and rear ACM solenoid control, fuel pump cycling, A/C cycling, clutch on/off, left clutch electromagnetic coil test, acceleration device test, oil pressure control test, dynamic camera aiming, vehicle level position calibration, brake vacuum pump operation, inlet/outlet valve tests, open brakes test, parking brake motors, wheel speed sensor supply, parking brake tests, and suspension level control calibration (rodeo test).
The X431 PAD V provides extensive connector coverage for nearly all vehicles worldwide. It comes with 15 OBD1 connectors: TOYOTA-17, TOYOTA-22, HONDA-3, MAZDA-17, FORD-6+1, NISSAN-14+16, SSANGYONG-20, CHRYSLER-6, SUBARU-9, KIA-20, DAEWOO-12, GEELY-22, GMVAZ-12, BMW-20, BENZ-38, and a UNIVERSAL-3 diagnostic connector. It also includes 12 OBDII & additional cables: GAZ, OBDII-16 extend cable, SSANGYONG-14, SUZUKI-3, AUDI-4, FIAT-3, MITSUBISHI/HYUNDAI-12+16, OBD1 adapter, BENZ-14, NISSAN-14+16, DAIHATSU-4, power cable clips, and a gigabit network cable.
The device features multiple additional interfaces: USB Type-C, USB Type-A, TF slot, OBD I adapter box transfer line, double clamp power line, cigarette lighter power line, and QC3.0 fast charging adapter.
Attention: The HAINAN MAZDA-17+2 connector has been removed from the box because it only works in China. This was done by Launch during manufacturing.
Modification Car Diagnostic Tool
To improve car performance and enhance your experience as a driver or owner, you can change or add the functions by changing or adding certain modules that aren’t already in your vehicle, such as adding a satellite navigation system, courtesy lamps, car phone, parking sensors, atmosphere lights, etc. Compatible with Volkswagen, Audi, BMW, etc.
Online Parameterization/Flash Hidden Functions
The X431 PAD V includes help mode and expert mode, guiding users efficiently through complex operations and ensuring accurate configuration of vehicle systems.
Users can activate advanced functions such as customizing interior lighting, automatic door locking at specific speeds, adaptive headlights, dashboard brightness adjustment, and reversing mirror tilt. At the same time, it allows you to disable unwanted features, including auto start-stop, injector buzz sounds, seatbelt warning chimes, mirror auto folding/unfolding, and other factory alerts.
Guided Function for VAG Vehicles
LAUNCH X431 PAD V car scan tool provides step-by-step repair guidance for technicians. The function of guiding the use of the product to prevent the car setting caused by wrong operation.Compatible with VAG series vehicles(Volkswagen / Audi / Skoda / Seat, etc.
ECU Online Programming + ECU Coding + J2534 Programming (Unlimited IP)
With smartlink c, launch x431 pad v automotive scanner can compliant to D-PDU, SAE J2534 & RP1210 to update OEM software, replace the existing software/ firmware in ECU, fix ECU parameter loss, programming new ECU and fixing software-controlled drivability issues and emission issues.it can do ecu programming for 30+ car brands, including for VW, for Ford, for Audi, for BMW, for Hyundai, for Kia, for Land Rover, for MG, for Benz, for Porsche, for Renault, for Seat, for Skoda, for Subaru and more. Reach us to get the car coverage list.
When Do You Need to Do Online Programming?
Unprogrammed blank module/control module not coded
The module data record is lost and the control unit is damaged
Fuel quality defective firmware upgrade
Software upgrade/part number upgrade
How to Enable the Online Programming Function
You can download the latest version of software from the online server database through Internet access (this procedure is done automatically when the scan tool is connected to the Internet, so there is no need to check for software updates yourself), and reprogram the newest version into the vehicle's ECU.
Click Local Diagnose menu>Choose Porsche model>Find the online function>No online programming function on the menu>Go back to the main menu>Click other Modules>Click the Bulit-in apps above>Click files>Click lntrnal Storge>Click cnlaunch folder>Click X-431 PADV folder>Click assets folder>Drop down to find the StdCfg.ini file>Click on the “ES Note Editor” file manager>Drop down>Find OnlineFlash and Flash>Select the Edit option in the upper right corner>Start to change data>Change OnlineFlash=0 to OnlineFlash=1>Change Flash=0 to Flash=1>Save it after modification.>Go back to the diagnostic menu to get the online programming function
Why Is the Launch X431 Pad V Scan Tool More Powerful Than Other J2534 Tools?
The X431 PAD V online programming does not require expensive online accounts; just connect to WIFI, saving maintenance costs. J2534 programming tool needs to download OEM software and login account (annual subscription is required).
Smartlink C adapter adopts dual WIFI communication to improve programming speed, thereby reducing the possibility of programming errors. When using the J2534 tool, in addition to the connector, it is also necessary to consider issues such as adapting the computer, installation costs, and complete functions, which is not cost-effective.
Component Matching:
1-1Want to have the right direction while re-flashing the vehicle control modules after auto parts repair or replacement? Just follow the on-screen instructions to clear the original memories stored in ECU, and write the adaptive data into specific components. LAUNCH X431 PAD V is a commercial-grade scan tool that will help you correctly build stable communication between new ECU modules.
Activate / Deactivate Functions:
2-1You can also use this scan tool to disable troublesome functions and activate high-end car features as follows:
Rear-view mirror folding/disabling seat belt alarm/maximum speed limiter/Deactivating the Start/Stop function /Seatbelt warning sounds /Mirrors automatically folding and unfolding /Closing the windows after closing the car door with the key /Flashing the brake lights during emergency braking /Activating/deactivating daytime running lights /Changing the brightness of daytime running lights /Flashing of the headlights when the alarm system is triggered /Displaying of the real speed via GPS signal /Displaying the amount of fuel consumption at a given speed /Changing the brightness of the dashboard /Displaying the optimal gear changing time in eco or sport mode /Select whether the display should be on the dashboard or head-up display /Incoming call display /And many more …
Flash Hidden Functions:
3-1 activate advanced functions or disable vehicle functions: like Deactivating the Start/Stop Function; Beeping When Unlocking and Locking; Seat belt Warning Sounds; Mirrors Automatically Folding and Unfolding; and more. Note: Online programming and ecu coding do not work on all cars.
Provides module network structure topology, better to let you know the car clearly and simple!
The Launch X431 features color-coded topology, allowing all system statuses to be displayed on a single page. The Topology Map shows the communication structure between modules, making it easy to spot problems at a glance. With OEM Topology Mapping, repair analysis is streamlined, helping you quickly identify faults and their causes.
The Topological Diagram function supports five ways to view DTCs: Topology Map, List View, Individual Control Unit, Intelligent Diagnostics Details, and Vehicle Diagnosis Report. The innovative Topology view highlights module status and communication in a clear, intuitive format, enabling faster troubleshooting. This function is highly useful for mechanics, DIY enthusiasts, and anyone performing vehicle diagnostics. Note: Topology may not be available on all vehicles.
Launch X431 Pad V Diagnostic Tool Supports More Than 60 Special Reset Functions. ( Keep Growing with Updates)
The Launch X431 PAD V Auto Diagnostic Tool comes equipped with over 60 commonly used special functions to address complex issues that may arise after vehicle repairs. These functions can be accessed via the Diagnose Menu: simply select Diagnose Menu → your car model and year → system → Special Function.
Key Special Functions Include:
Oil Lamp Reset: Recalculates the Engine Oil Life system after an oil change.
EPB Reset: Assists in replacing and resetting brake pads.
BAT Battery Service (BMS): Clears low battery faults and synchronizes the battery with the vehicle system.
D.PF Service: Performs regeneration of Diesel Particulate Filter systems.
Fuel Injector Coding: Writes new injector codes to ensure correct cylinder injection.
TPMS Service: Reads tire pressure monitoring system data and identifies any issues.
Suspension Reset: Calibrates vehicle body height sensors for proper leveling.
A/F Reset: Sets or learns Air/Fuel ratio parameters.
AdBlue Reset: Resets urea after refilling or replacing diesel exhaust treatment fluid.
Coolant Bleeding: Activates the electronic water pump for coolant system maintenance.
Language Change: Updates the vehicle system language.
NOx Sensor Reset: Resets the learned values of the catalytic converter stored in the ECU.
Additional Functions: Stop/Start Reset, Seat Calibration, Transport Mode, Windows Calibration, AC System Relearn/Initialization, High Voltage Battery Diagnosis, GPF Regeneration, Fuel Alcohol Level Reset, Fuel Trim Reset, VGT Reset, EGR Valve Learn, Crankshaft Position Variation Learn, Clutch Pedal Position Learn, Idle Learn, Fuel Economy Test, CBS Reset, UDS, and more.
New Added 6 Reset Functions on Nov,2024: Ecu Reset, Frm Reset, Clutch Reset, Gate Reset, Turbo Reset, Risensor Reset
Faster Troubleshooting and More Advanced Functions Help You Win More Businesses
Launch x431 pad v as a professional scan tool, it can access wirelessly all available vehicle modules, including but not limited to PCM, ECM, EPS, PDM, BCM, TPM, SCCM, RADIO and etc. With complete capability for codes, it can read and clear codes on all systems and subsystems and be able to show live PID data of multiple sensors in graph or text.
Bi-Directional Control /Active Test to send command to the ECU to perform specific tests for accurately identifying problems,the launch scanner x431 pad v support: injector buzz test, idle speed adjustment, window lock test, door lock test, glow on/off, ACG on/off, switch cylinder correction on/off, fuel pump, EG.R test, IMRC test, EVAP test, A/C compressor activation, turn on the radiator fan, clutch on and off, acceleration device test, modulate the throttle, pump and valve test etc.
IMMO Keys: With the IMMO Keys function, LAUNCH X431 PAD V can add new keys, disable/clear information of the lost vehicle keys, and program the replacement key fob for most Asian and American vehicles, which come with low-grade anti-theft systems. Note: this function varies on the car model and the year.
PIN Detection Function: Pin detection can be used to detect the voltage of the vehicle OBD-II diagnostic socket pins and the supported protocol types to help technicians judge the OBD-II diagnostic interface.if the detection result does't match the actual vehicle configuration,the corresponding pin may be faulty.
Fault Guidance Function
Unlike other scanning tools, the X431 PAD V scanner has a unique fault guidance feature. It is designed to help diagnose and troubleshoot vehicle faults more efficiently and accurately by providing detailed information about common faults, including potential causes, symptoms, and possible fixes.
With this feature, when a fault code is detected, the device will search its database for information related to that code and provide a detailed report to the user. This report may include information about similar faults that have been reported on the same vehicle model or make, as well as any known fixes or workarounds. In addition to providing useful information about vehicle faults, it can also help users to save time and reduce the need for trial-and-error methods, by providing clear instructions for troubleshooting and repairing vehicle faults.
ADAS Calibration: ADAS is a helping hand when sleepy drivers accidentally swerve out of their lane and into another car. And ADAS calibration of X431 Pad v scanner helps you to effectively and accurately calibrate a wide range of camera-based & radar-based driver assistance systems.
It is needed during the following scenarios: 1. Windshield replacement;2. Collision;3.Replacement change in tires or ride height;4.ADAS lights are on or flashing; That will make your driving experience safer than ever before.
Power Balance: Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor-running engine, which is commonly missed with other tests. It's one of the best and easiest ways to find the source of an engine misfire. Furthermore, cylinder power balance testing is often used along with cylinder compression and cylinder leakage tests to further pinpoint the problem.
PMI(Programmable Module Installation)LAUNCH X431 Pad v Support PMI function, Compatible with F-ord /L-incoin/ Ma-zda etc. This function is used when you need to replace a module (replace ECU) or initialize a module. No need to use the J2534 or buy a subscription.
More Different Functions Waiting for You To See!!!
Wide Vehicle Coverage:
The Launch X431 PAD V scanner supports an extensive range of vehicle brands, including but not limited to: Aston Martin, Audi, AustFord, AustHolden, AutoSearch, BAIC, Benz, BMW, Fiat, GM, Changan, Chrysler, Citroen, Daewoo, Daihatsu, Ferrari, Ford, GAZ, Honda, Hyundai, Isuzu, Iveco, Kia, Land Rover, Lifan, Luxgen, Mahindra, Maserati, Mazda, Mitsubishi, Opel, Peugeot, Porsche, Proton, Renault, Subaru, Suzuki, Tata, Toyota, Volvo, VW, and many more. This broad compatibility ensures that the scanner can work seamlessly across most car brands worldwide.
The PAD V also supports all electronic control systems of 12V new energy vehicles. It can diagnose faults across the majority of new energy vehicle systems in Europe, America, Asia, and China. This feature allows full vehicle fault diagnosis for all models and systems. (Note: activation requires an additional fee.)
With optional HD software, the X431 PAD V can function as a comprehensive heavy-duty truck diagnostic tool. It supports both heavy-duty (Class 4–8) and medium-duty trucks, including city buses, bulldozers, and excavators. (Note: the HD module is not required; only the HD software purchase is necessary.)
Package List
1. X431 PAD V Elite Tablet
2. SmartL .ink-C
3. Charging Dock
4. OBD1 &OBD2 Connector Kit
5. Main Unit Kit
EN
